توضیحات
| Model | T4LP | |
| Power supply | ۱۱۰/۲۲۰VAC 50/60Hz | |
| Allowable voltage range | ۹۰ to 110% of rated voltage | |
| Power consumption | Max. 3VA | |
| Display method | ۷ Segment LED method | |
| Character size(W×H) | ۹٫۵×۱۴٫۲mm | |
| Display accuracy | F.S. ±۰٫۵% rdg ±۱digit | |
| Setting type | Digital setting | |
| Setting accuracy | F.S. ±۰٫۵% | |
| Sensor input | Thermocouples: K(CA), J(IC), R(PR) / RTD: DPt100Ω | |
| Input line resistance | Thermocouples: Max. 100Ω, RTD: Allowable line resistance max. 5Ω per a wire | |
| Control method | ON/OFF control | Hysteresis: F.S. 0.2 to 3% variable |
| P control | Proportional band: F.S. 1 to 10%, Period: 20sec. fixed | |
| RESET adjuster range | F.S. ±۳% variable (revision of control deviation / only for P control) | |
| Control output | • Relay contact output: 1st out: 250VAC 3A 1c, 2nd out: 250VAC 2A 1c • SSR drive voltage output: 24VDC ±۳V 20mA Max. • Current output: DC4-20mA (load 600Ω Max.) |
|
| Self-diagnosis | Built-in burn out function (cut off output when sensor is disconnected) | |
| Insulation resistance | Min. 100MΩ(at 500VDC megger) Dielectric strength |
|
| Dielectric strength | ۲۰۰۰VAC 50/60Hz for 1 minute | |
| Noise strength | ±۲kV the square wave noise(pulse width:1㎲) by the noise simulator | |
| Vibration | Mechanical | ۰٫۷۵mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hour |
| Malfunction | ۰٫۵mm amplitude at frequency of 10 to 55Hz(for 1 min.) In each of X, Y, Z directions for 10 min. | |
| Shock | Mechanical | ۳۰۰m/s²(Approx. 30G) in each of X, Y, Z directions for 3 times |
| Malfunction | ۱۰۰m/s²(Approx. 10G) in each of X, Y, Z directions for 3 times | |
| Relay life cycle | Mechanical | Min. 10,000,000 operations |
| Electrical | Min. 100,000 operations(250VAC 3Aat resistive load) | |
| Environment | Ambient temperature | -۱۰ to 50℃, storage: -25 to 65℃ |
| Ambient humidity | ۳۵ to 85%RH, storage: 35 to 85%RH | |
| Unit weight | Approx. 487g | |
